Application:
Used to remove sharp edges, burrs, or machine residues from metal components

Brush Type:
Wheel, end, cup, flat, round brushes

Materials – Filament:
Stainless Steel, Carbon Steel, Brass, Abrasive Nylon

Application:
Used on automated equipment for surface preparation, cleaning, polishing or guiding

Brush Type:
Rotary, disc, round, disc brushes

Materials – Filament:
PBT, Nylon, Natural Hair, Conductive Nylon

Application:
Used in pre-paint and post-paint for cleaning, removing dust, lint and applying lubricant

Brush Type:
Rotary, strip, belt brushes

Materials – Filament:
Conductive Nylon, Natural Hair

Application:
Used in line and production area cleaning and guiding or clearing debris

Brush Type:
Skillet systems, rotary, flat, disc brushes

Materials – Filament:
PBT, Nylon, Conductive Nylon

Application:
Used for deburring engine parts, turbine blades landing gear components and hydraulic manifolds

Brush Type:
Round, wheel, end, disc brushes

Materials – Filament:
Abrasive Nylon, Nylon, Stainless Steel, Brass

Application:
Used for pre-bond cleaning, removing corrosion, and surface activation

Brush Type:
Cup, flat, round, disc brushes

Materials – Filament:
Nylon, Conductive Nylon, Tampico, Polyamide 6, Stainless Steel

Application:
Used to remove grease and debris, cleaning fuel and hydraulic lines and cooling channels

Brush Type:
Tube, twisted-in-wire, round, detail brushes

Materials – Filament:
Brass or Nylon (non spark), Stainless Steel

Application:
Used for cleaning moulds and tooling between layups, and removing dust or surface prep before bonding, creating a polished finish

Brush Type:
Round, disc, rotary, strip brushes

Materials – Filament:
PBT, Abrasive Nylon, Polyimide 6, Nylon

Application:
Used for component protection, other precision cleaning and surface preparation

Brush Type:
Round, cone, disc, strip, table brushes

Materials – Filament:
Abrasive Nylon, Natural Hair, Nylon

Application:
Used for removing rust, scale and paint, or cleaning welds on metal structures

Brush Type:
Cup, wheel, end, hand brushes

Materials – Filament:
PBT, Nylon, Stainless Steel, Abrasive Nylon, Brass

Application:
Used for cleaning masonry or stone, scrubbing dried concrete or giving a textured finish to concrete

Brush Type:
Round, flat, strip, rotary brushes

Materials – Filament:
Nylon, PP, Stainless Steel, Carbon Steel, Tampico

Application:
Used for site and road cleaning

Brush Type:
Rotary, lag, round brushes

Materials – Filament:
PBT, Nylon, Stainless Steel, Carbon Steel, PP

Application:
Used for dust control, sealing and pipe of duct cleaning

Brush Type:
Strip, tube, twisted-in-wire, round brushes

Materials – Filament:
Stainless Steel, Brass, Nylon, PP

Application:
Used for cleaning pipelines to maintain or prepare for inspection

Brush Type:
Round, flat, disc, cone, cup, pencil, segment, spring arm, pig brushes

Materials – Filament:
Carbon Steel, Stainless Steel, Brass

Application:
Used for MFL (Metal Flux Leakage) inspection, debris removal and wall cleaning during inspection

Brush Type:
Pencil, round, disc, wrap, flexible, segment brushes

Materials – Filament:
Stainless Steel, Carbon Steel, Copper, Tinned Wire

Application:
Used for cleaning well walls and preparing surfacing for coating

Brush Type:
Tube, cone, disc, round, T-Brush, casing, riser brushes

Materials – Filament:
Carbon Steel, Stainless Steel, Brass, Nylon

Application:
Used for cleaning dirt and debris without damaging produce and applying pesticides to weeds

Brush Type:
Roller and shaft, round, disc, lag/Lath brushes

Materials – Filament:
PBT, Nylon, Tampico, PET

Application:
Used to guide, sort, align produce and cleaning automated conveyor systems

Brush Type:
Rotary, round, strip brushes

Materials – Filament:
PBT, Nylon, Food Grade PP

Application:
Used as stationary objects for animals to brush past or as attachments to automated machines

Brush Type:
Rotary, disc, wafer, lath/lag brushes

Materials – Filament:
PBT, Nylon, PP

Application:
Used to spread film or smooth worm casts and turf maintenance

Brush Type:
Spiral, round, rotary, spreader, lath/lag

Materials – Filament:
PBT, Nylon, PP

Application:
Used to flick seed on feeders or apply coatings within processing equipment such as coatings and nutrients

Brush Type:
Flat, strip, round, rotary, spiral, lath/lag

Materials – Filament:
PBT, Nylon, Food Grade PP

Application:
Used for marine growth, rust and algae removal as well as preparation for pipeline inspection, painting and apply coatings

Brush Type:
Disc, round, tube, cone, disc brushes

Materials – Filament:
PBT, Nylon, Pure Bristle (coatings only), Stainless Steel, Natural Hair

Application:
Used to clean the insides of subsea pipelines for general maintenance or prior to inspection

Brush Type:
Twisted-in-wire, spiral, riser, round brushes

Materials – Filament:
PBT, Nylon, Stainless Steel, Abrasive Nylon, Brass

Application:
Used for digital presses, web-fed paper systems and packaging/ label machines to prevent jams, and double feeds

Brush Type:
Sphere, spreader roller, round, roller and shaft, belt, rectangle brushes

Materials – Filament:
Nylon, PP, Conductive Nylon, Carbon Fibre, Stainless Steel, Brass

Application:
Used to remove lint and fibres from belts and surfaces to avoid defects, smudges or poor print quality

Brush Type:
Rotary, strip, belt brushes

Materials – Filament:
Goat and Horsehair, Nylon, Soft PP or PBT

Application:
Used to control, guide, stabilize and spread paper sheets or webs as they move through printing and finishing lines

Brush Type:
Roller, round spreader, strip, belt

Materials – Filament:
Soft Nylon or PBT, Conductive Nylon, Natural Hair

Application:
Used to clean production lines, reactors, and processing equipment or residue from workstations

Brush Type:
Cone, round, cup, roller and shaft, round, tube and tank brushes

Materials – Filament:
Anti-static, Nylon, Food Grade Nylon or PP, Colour Coded

Application:
Used to guide, clean or separate capsules, tablets and packaging materials during production

Brush Type:
Rotary, round, strip brushes

Materials – Filament:
Nylon, Carbon Fibre, Conductive Nylon (non shedding), Food Grade

Application:
Used for pocket cleaning, and routine maintenance of tablet presses and capsule fillers

Brush Type:
Round, cup, rotary, tube, precision brushes

Materials – Filament:
PP, Nylon, Natural Hair, PBT, Stainless Steel or Brass (non product)

Application:
Used to remove dust, polish residue or cutting oils from glass sheets, tubes or bottles before processing (coating, tempering, laminating)

Brush Type:
Rotary, round, disc, hand brushes

Materials – Filament:
Nylon, PP, Natural Hair (goat), Abrasive Nylon

Application:
Used to protect materials from scratching, guiding and supporting movement or to prevent slipping

Brush Type:
Table, strip, rotary, round

Materials – Filament:
Nylon, Foam, Anti-static

Application:
Used to improve glass clarity, remove fine dust or apply coatings and polishing compounds

Brush Type:
Round, rotary, flat, flocked

Materials – Filament:
Natural Fibres – Tampico, Felt, Goat Hair, Nylon, PP

Application:
Used for rust removal, deburring, surface preparation, weld cleaning, surface or edge finishing and edge blending

Brush Type:
Wheel, cup, end, tube, round, flat

Materials – Filament:
Stainless Steel, Carbon Steel, Brass, Bronze, Abrasive Nylon

Application:
Used for Continuous cleaning or polishing, Deflecting, sealing or wiping within machinery and guiding parts on production lines

Brush Type:
Belt, strip, table, flat, rotary

Materials – Filament:
Nylon, Anti-static, PP, Brass, Natural Hair

Application:
Used to prevent scratching on delicate parts, hold or stabilize parts as they move

Brush Type:
Table, panel, Mini rollers, flat bed

Materials – Filament:
Nylon, Brass, Anti-static, Fire-proof

Application:
Used to open or align fibres before spinning, or remove lint, or NEPS (fibre knots) mounted inside carding, combing and blow room machines

Brush Type:
Rotary, cylinder

Materials – Filament:
Natural Fibres – Tampico, Horse or Goat Hair, Nylon, PP, Brass

Application:
Used to keep fabric slat, smooth and wrinkle free while its rolled or un-rolled or prevent folds, static or uneven tension. Could also use in printing or dying

Brush Type:
Roller, rotary, cylinder

Materials – Filament:
Nylon, PP, Anti-static, Conductive, Natural Fibres

Application:
Used to achieve a uniform sheen or smooth surface

Brush Type:
Roller, rotary, cylinder

Materials – Filament:
Natural Fibre, Horsehair, Soft Nylon

Application:
Used to smooth products along or clean conveyers, guide align or separate items without damage or prevent jams or tipping of lightweight packaging

Brush Type:
Rotary, roller, strip

Materials – Filament:
Nylon, PP, Natural Fibres – Horsehair or Tampico, Conductive, Anti-static

Application:
Used to ensure smooth surface contact for label adhesion, remove dust or static from surfaces or spread adhesive on labels then onto packaging

Brush Type:
Strip, pad, rotary, roller

Materials – Filament:
Nylon, PP, Foam

Application:
Used to even material to ensure a flat, smooth and wrinkle free surface, to prevent misalignment on conveyers and remove static from films and foil

Brush Type:
Strip, rotary, edge, roller

Materials – Filament:
Natural Hair (horse), Tampico, PET, Carbon Infused Nylon

Application:
Used in PCB assembly, semi-conductor manufacturing to safely dissipate electrostatic charges (ESD) from people, components and work surfaces

Brush Type:
Hand, strip, rotary

Materials – Filament:
Carbon Fibre, Stainless Steel, Conductive Nylon or PP, Goat Hair

Application:
Used for removing flux, dust, solder paste or residues from delicate components or assemblies

Brush Type:
Hand, rotary, end, micro

Materials – Filament:
Nylon, Goat Hair, Conductive Nylon, Carbon Fibre, PP, Nylon

Application:
Used for smoothing surfaces, sanding for staining or painting, deburring edges from cut edges, and creating textured finishes

Brush Type:
Roller, rotary, disc, wheel, end, cup, round

Materials – Filament:
Abrasive Nylon, Stainless Steel, Brass, Nylon, PP

Application:
Used for movement of panels, boards and components on conveyers or cutting tables to reduce friction, remove dust and prevent scratching or marking

Brush Type:
Strip, roller, rotary

Materials – Filament:
Anti-static, Nylon, PP, Horsehair, Tampico

Application:
Used to polish or apply polish, varnish or lacquer

Brush Type:
Rotary, roller, hand, wheel, pad

Materials – Filament:
Horse or Goat Hair, Felt, Nylon

Application:
Used for turf and grass brushing or grooming, levelling tracks and wormcasts, spreading sand, redistribute soil, remove debris or prepare surfaces for mowing, aeration, seeding

Brush Type:
Rotary, roller, lag, drag, matt

Materials – Filament:
PBT, Nylon, PP, Wire, Natural Fibres

Application:
Used in systems or alone to remove dirt and debris from footwear

Brush Type:
Flat, block, round, rotary

Materials – Filament:
PBT, Nylon, PP

Application:
Used for sweeping or removing debris such as leaves, soil, litter or snow in winter

Brush Type:
Rotary, roller, lag, drag

Materials – Filament:
PBT, Nylon, PP, Wire, Natural Fibres

Application:
Used for sanding or smoothing components before coating, removing fibres, burrs or raised grain or removing dust and cleaning between coatings

Brush Type:
Rotary, roller, round, disc wheel, end

Materials – Filament:
PBT, Nylon, PP, Anti-static Conductive Nylon, Abrasive Nylon

Application:
Used for coating, glazing, polishing and buffing surfaces

Brush Type:
Rotary, strip, flat, roller, Disc, wheel, end

Materials – Filament:
Natural Fibres – Horsehair, Tampico, Goat Hair, Soft Nylon or PP, Anti-static Nylon, Felt

Application:
Used to support, transport or clean panels and prevent scratching or marking

Brush Type:
Rotary, roller, strip, table, panel

Materials – Filament:
Nylon, PP, Anti-static Conductive Nylon, Horsehair or Tampico

Application:
Used for surface finishing, rust removal and paint preparation

Brush Type:
Round, cup, wheel

Materials – Filament:
Stainless Steel, Carbon Steel, Brass, Abrasive Nylon

Application:
Used in washing systems without scratching, removing debris and contamination from rails, tracks, crossings and stations

Brush Type:
Rotary, disc, block, strip

Materials – Filament:
Nylon, PP, Foam, Textiles & Flagged (vehicles only), Bronze & Brass (lines)

Application:
Used for dust sealing, weatherproofing and noise reduction

Brush Type:
Strip, door seal, cable-entry

Materials – Filament:
Nylon, PP, Anti-static Nylon, Heat Resistant

Application:
Used to maintain assets, flow and efficiency, and prevent mechanical clogging in inlet, drum filters, bar screens, belt presses and conveyors

Brush Type:
Rotary, roller, strip

Materials – Filament:
Nylon, PBT, PP, Steel

Application:
Used to keep pipes, channels, tanks and clarifier arms free from sediment, scale and biological growth

Brush Type:
Rotary, strip, flat, roller, lag, segment & disc (large pipes only), block

Materials – Filament:
Nylon, PBT, PP, Steel, Brass (non-sparking), Abrasive Nylon

Application:
Used for cleaning, sweeping and algae removal in tanks, sedimentation basins, clarifiers and channels or ‘weirs’

Brush Type:
Block, strip, lag, rotary

Materials – Filament:
PBT, Nylon, PP, Abrasive Nylon, Wire, Natural ‘eco’ Fibres – Tampico or Bassine

Application:
Used before and after machining, welding or coating to clean, remove sharp edges, burrs and residue material after cutting, drilling, milling or processing

Brush Type:
Disc, end, wheel, cup, flat, block, round

Materials – Filament:
Abrasive Nylon, Stainless or Carbon steel, Brass, Composite with Nylon

Application:
Used for general cleaning of machines, conveyors, parts, and tools during manufacturing process or maintenance

Brush Type:
Rotary, roller, block, pipe, tube, hand

Materials – Filament:
Nylon, PP, Brass, Steel, Abrasive Nylon, Natural ‘eco’ Fibres – Tampico or Bassine, Anti-static Conductive Nylon

Application:
Used to prevent damage, marking and contamination when components are being machined, assembled or inspected on workstations, conveyors or jigs

Brush Type:
Panel, table, mat, block

Materials – Filament:
Nylon, PP, Natural Hair – Horse or Goat, Anti-static Conductive Nylon, Heat Resistant

Application:
Used to maintain hygiene and operational efficiency on machines, conveyors, parts and work areas, remove dust, oil and other residue

Brush Type:
Rotary, roller, Cup, block, tube & discs (pipes only)

Materials – Filament:
Nylon, PP, Brass, Steel, Natural Fibres – Horsehair or Tampico

Application:
Used to clean, deburr, polish or texture surfaces before machining, painting, coating, assembly, before packaging or labelling

Brush Type:
Disc, flat, cup, wheel, block, round

Materials – Filament:
Stainless or Carbon Wire, Brass, Abrasive Nylon, Nylon, PP or Natural Hair

Application:
Used to label, move, support, guide and protect material on conveyers, machines or workstations to prevent marking, scratching and damage

Brush Type:
Flat, panel, table, strip, roller, rotary

Materials – Filament:
Nylon, PP, PBT, Horsehair, Goat Hair, Anti-static Conductive Nylon, Heat Resistant, Brass (non-sparking)

Application:
Used to keep trommel screens, and machinery and conveyors free from clogging during sorting

Brush Type:
Rotary, roller, spiral, strip, flat, belt

Materials – Filament:
Nylon, PBT, PP, Wire, Rubber

Application:
Used to prevent material, dust and dirt build up and contamination and remove debris as part of machinery or machine and forklift attachments

Brush Type:
Lag/drag/lath, roller, rotary

Materials – Filament:
Nylon, PP, PBT, Wire

Application:
Used to contain debris, reduce dust, and protect moving machine parts

Brush Type:
Strip

Materials – Filament:
Nylon, PP, PBT, Wire, Horsehair

Application:
Used to clean bottles, containers and other plastic waste in rotating drums or in-line brush washers on recycling lines

Brush Type:
Rotary, rollers, strip

Materials – Filament:
Nylon, PBT

Application:
Used to keep trommel screens, and machinery and conveyers free from clogging during sorting

Brush Type:
Rotary, roller, spiral, strip, flat, belt

Materials – Filament:
Nylon, PBT, PP, Wire, Rubber

Application:
Used to prevent material, dust and dirt build up and contamination and remove debris as part of machinery or machine and forklift attachments

Brush Type:
Lag/drag/lath, roller, rotary

Materials – Filament:
Nylon, PP, PBT, Wire

Application:
Used to contain debris, reduce dust, and protect moving machine parts

Brush Type:
Strip

Materials – Filament:
Nylon, PP, PBT, Wire, Horsehair

Application:
Used to aid eels, lampreys and fish to move upstream over weirs, dams, and other obstructions to provide a textured low-flow pathway they can grip onto

Brush Type:
Flat boards, flex boards, belt, block

Materials – Filament:
Nylon, PP, PBT

Application:
Used to support erosion control, sediment capture and vegetation establishment in restoration or flood mitigation schemes

Brush Type:
Beds, flat or flexible boards, bristle barriers

Materials – Filament:
PP, Nylon, Coco, Tampico or Bassine

Application:
Used to create artificial reefs or floating wetlands, provide artificial spawning substrates and invertebrate colonization surfaces, simulate aquatic vegetation

Brush Type:
Beds, flat or flexible boards, bristle structures

Materials – Filament:
PP, Nylon, Coco, Tampico or Bassine

Application:
Used to clean sieve frames and mesh surfaces in plansifters (sieving machines) to prevent clogging and maintain sieve efficiency. Polish grains and remove husks

Brush Type:
Round, flat, cylinder, rotary

Materials – Filament:
Nylon, PBT, Tampico, Horsehair, Abrasive Nylon (for barley or maize polishing only)

Application:
Used to prevent material build up or contamination on belts, rollers, conveyors and elevator buckets or cleaning flour, dust and residue

Brush Type:
Rotary, strip

Materials – Filament:
Nylon, PP, PBT, Anti-static Nylon

Application:
Used for dust sealing, machine guarding and product containment around conveyers, chutes and sifters

Brush Type:
Strip

Materials – Filament:
Nylon, PP, PBT, Anti-static Nylon

Application:
Used to remove sharp edges and oxide layers left by laser cutting, punching or machine operations

Brush Type:
Wheel, cup, end, tube, round, flat

Materials – Filament:
Stainless Steel, Carbon Steel, Brass, Bronze, Abrasive Nylon

Application:
Used to improve surface texture, create a uniform finish or prepare metal for coating, anodizing or welding

Brush Type:
Cylinder, rotary, wheel

Materials – Filament:
Abrasive Nylon, Nylon, Stainless or Carbon Steel, Brass

Application:
Used to prevent scratching on delicate parts, hold or stabilize parts as they move

Brush Type:
Table, panel, Mini rollers, flat bed

Materials – Filament:
Nylon, Brass, Anti-static, Heat Resistant

Application:
Used during turbine maintenance to prepare composite or metal surface before coating or bonding

Brush Type:
Round, cup, end, wheel

Materials – Filament:
Abrasive Nylon, Wire, Brass

Application:
Used to protect mechanical and electrical systems from dust, insects and moisture intrusion

Brush Type:
Strip

Materials – Filament:
Nylon, PP, PBT

Application:
Used to remove dust, sand, bird droppings and organic matter that reduces solar efficiency

Brush Type:
Rotary, flat, roller

Materials – Filament:
PBT, Nylon, Microfibre, Foam, Carbon Fibre

Application:
Used on production lines, for glass cleaning, dust removal and handling to prevent marking or scratching

Brush Type:
Rotary, roller, strip

Materials – Filament:
Anti-static Nylon, Carbon Fibre, Natural Hair – Goat or Horse

Application:
Used to prevent dust ingress into enclosures and tracking installations (especially in desert installations)

Brush Type:
Strip

Materials – Filament:
Nylon, PP Anti-static (UV and heat resistant)

Application:
Used to remove radioactive particles, oxides or residues from surfaces, equipment or tools during maintenance or decommissioning

Brush Type:
Hand, rotary, roller, cup, custom brush heads (automation)

Materials – Filament:
Stainless Steel, Brass, Abrasive Nylon, PP, PBT

Application:
Used to provide dust, debris or radiation shielding seals in equipment housing, airlocks or glovebox transfer systems

Brush Type:
Strip, flexible

Materials – Filament:
Nylon, PBT, Conductive Carbon Loaded Filaments, Anti-static

Application:
Used to dissipate static electricity in radiation-sensitive or electronic control areas and prevent attraction of radioactive dust

Brush Type:
Hand, strip, rotary, flat

Materials – Filament:
Carbon Fibre or Graphite Impregnated Conductive Nylon,

Application:
Used to mount robotic arms or automated systems to clean or maintain contaminated areas or high radiation without human exposure

Brush Type:
Rotary, drum, custom designed brush heads

Materials – Filament:
Stainless Steel, Nylon, PBT Carbon Fibre Nylon

Application:
Used to remove debris and dust from pipes and ducting before laying cables

Brush Type:
Round, cylinder

Materials – Filament:
Nylon, PBT, Bassine, HDPE (mandrels without bristle)

Application:
Used to keep warehouses and yards free of dust and debris as forklift attachments

Brush Type:
Rotary, lag/lath

Materials – Filament:
Nylon, PBT, PP, Stainless or Carbon Steel

Application:
Used to remove dust, debris, packaging and other residue to prevent jamming or product contamination

Brush Type:
Rotary, cylinder, strip

Materials – Filament:
Nylon, PP, PBT, Abrasive Nylon, Anti-static, Rubber

Application:
Used to provide dust, light and pest sealing on dock doors, roller shutters and conveyors to prevent contamination, draught and energy loss

Brush Type:
Strip

Materials – Filament:
Nylon, PP, Anti-static, Fire Retardant, Natural Hair

Application:
Used to shield, seal and protect equipment from dust, light and insects in mobile units and hanger systems

Brush Type:
Strip

Materials – Filament:
Nylon, PP, Anti-static, Fire Retardant, Natural Hair

Application:
Used to clean and maintain defence ground vehicles such as jeeps, tanks and transporters

Brush Type:
Rotary, hand, roller

Materials – Filament:
PBT, Nylon, PP

Application:
Used to remove powder fouling, lead tarnish, copper build up and carbon from the bore

Brush Type:
Round, cylinder, tube, twisted-in wire

Materials – Filament:
Bronze, Brass, Phosphor Bronze, Nylon, Stainless Steel, Cotton/Nylon Mops (for applying solvents, oil and polishing)

Application:
Used to apply polish, buffing and finishing

Brush Type:
Flat, block

Materials – Filament:
Horse or Hog hair, Tampico, Nylon, PBT